$ sudo nano /etc/network/interfaces.d/can0
...and add the following:
allow-hotplug can0
iface can0 can static
bitrate 125000Supported bitrates are 125000, 250000, 500000, 1000000 for standard CAN (non-FD).
Saturday, December 15, 2018
Configuring CAN interface during boot
This is an easy way to configure a CAN bus interface during boot. Just create a new config file:
...and add the following:
Supported bitrates are 125000, 250000, 500000, 1000000 for standard CAN (non-FD).
...and add the following:
Supported bitrates are 125000, 250000, 500000, 1000000 for standard CAN (non-FD).
Subscribe to:
Posts (Atom)